Ford Ranger 2008 - Automatic Transmission Controls

Black plate (88,1)
Automatic Transmission Controls
Indicates the shift lever can be shifted freely into any position.
Indicates that you must hold in the lock-release button to shift.
Various Lockouts:
Lock-release button
qTransmission Ranges
The shift lever must be in P or N to
operate the starter.
P (Park)
P locks the transmission and prevents the
rear wheels from rotating.
WARNING
Always set the shift lever to P and set
the parking brake:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is dangerous.
If P fails to hold, the vehicle could
move and cause an accident.
CAUTION
l
Shifting into P, N or R while the
vehicle is moving can damage your
transmission.
l
Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transmission.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-7).
5-10
Driving Your Ford
Starting and Driving
RANGER_F8M1-10-08I_Edition1 Page88
Friday, September 26 2008 3:6 PM
Form No.F8M1-10-08I