Booster Cushion (Group 3)
ISOFIX Anchor Points
WARNING
Use an anti-rotation device when
using the ISOFIX system.
Note: When you are purchasing an ISOFIX
seat, make sure that you know the correct
mass group and ISOFIX size class for the
intended seating locations. See Child
Restraint Positioning (page 21).
Your vehicle has ISOFIX anchor points that
accommodate universally approved
ISOFIX child restraints.
The ISOFIX system comprises two rigid
attachment arms on the child seat that
attach to anchor points on the outboard
2nd row seats, where the cushion and
backrest meet. Tether anchor points are
located behind the outboard 2nd row seats
for child seats with a top tether.
Top Tether Anchor Points
There are two child restraint anchor points
on the second row seats, one for each rear
seating positions.
Attaching a Child Seat with Top
Tethers
WARNINGS
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Make sure that the top tether strap
is not slack or twisted and is properly
located on the anchor point.
Note: Where applicable, remove the
luggage cover to ease installation.
1. Route the tether strap to the anchor
point.
20
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Child Safety
To Next Page
Loading...
