2. Slightly lift the hood.
3. Move the catch to the left for vehicles
with left hand drive. Move the catch to
the right for vehicle with right hand
drive.
4. Open the hood.
5. The hood strut automatically supports
the hood.
Closing the Hood
1. Lower the hood and allow it to drop
under its own weight for the last
20–30 cm.
2. If necessary, apply a downward force
on the leading edge of the hood prior
to engage with the latch, to latch the
hood fully.
Note: Make sure that the hood is correctly
closed.
230
Ranger (), EB3B-19G219-ZAB enAUS
Maintenance
To Next Page
Loading...
Need help?
General
