Changing the Remote Control
Battery
Make sure that you dispose of
old batteries in an
environmentally friendly way.
Seek advice from your local authority
about recycling old batteries.
Remote Control With a Folding Key
Blade - Type 1
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
1. Insert a suitable tool, for example a
screwdriver, in the position shown and
gently push the clip.
2. Press the clip down to release the
battery cover.
3. Carefully remove the cover.
4. Turn the remote control over to remove
the battery.
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Install a new battery with the + facing
upward.
6. Reinstall the battery cover.
Remote Control With a Folding Key
Blade - Type 2
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
28
Ranger (), EB3B-19G219-ZAB enAUS
Keys and Remote Controls