5.3.2 Muti-point CAL
When the other capacity accurate is not correct, then do the muti-point CAL, when
the screen display each capacity, then put on same mass weight on the pan.
5.3.3 Clock CAL
When the clock is not correct, then do clock CAL.
5.4 Print out results (optional)
You can print out the measurement results by using the optional T58Z printer.
1.Make sure that the printer is set up properly and both devices are connected to
each other.
2.9600 baud rates
3.nine core pin connection mode: 5 feet grounded 3 feet after sending.
4.Touch the print button, then can print the data
To Next Page
Loading...