INDUSTRIAL FIXED GAS DETECTOR, FD-60
FORENSICS DETECTORS
TM
!
!
FORENSICS DETECTORS
TM
www.forensicsdetectors.com
!
1. INTRODUCTION
The FORENSICS DETECTORS FD-60 FIXED GAS DETECTOR is the most
advanced wall mount fixed gas detector available and adopts an advanced
electrochemical gas sensor which can detect the gas concentration in the
air to a digital readout signal output. The detector can be used to detect
gas in various industrial environments such factory, refinery, chemical
plant, process rooms, exhaust prone facilities, toxic gas exhaust and
rooms, boiler rooms, painting plants/rooms and other places where toxic
gas exists. Please note, these type of detectors are referred to as “fixed
gas”, since they are fixed at one location when mounted.
FEATURES
• INDUSTRIAL: Heavy duty fixed gas detector. Comes FACTORY
CALIBRATED. Mount and Operate.
• USE: Remote Control up to 8 meters, Analog Output (4-20mA), 2 x
relay alarm triggered switch (1kW) to control fans, pumps, electrical
items, garage doors or additional alarms.
• FEATURES: Large LED alarm and buzzer. Adjustable audio, visual. Alarm
digital time stamp. Remote Control.
• ROBUST: Explosion, dust, water and flame proof. Explosion proof grade:
Exd ⅡC T6 Gb with IP65 housing protection.
• SAFE: With over-voltage protection, lightning protection, short circuit
protection, reverse connection protection, anti-static dry disturbance,
anti-magnetic field interference;
• SMART: Two point calibration to ensure the accuracy and linearity of
the monitor;
• REMOTE: Can be operated with infrared remote control, no need to
open the wall fixture.
• TRUST: ** 1 year limited warranty ** Arrives with calibration and QA
certificate ** 100% product test and verification in the USA ** 100%
quality guaranteed **
To Next Page
Loading...
