3
1. APPLY SERUM
Make sure both your skin and BEAR
™
device are clean and dry. Then
apply FOREO SUPERCHARGED
™
Serum evenly across all areas of the
face / neck you wish to treat, leaving
a thin mask-like layer on the surface
of the skin.
2. SELECT PREFERENCES
Press the universal button to turn your BEAR
™
2 go on. Adjust the microcurrent
intensity by quick-pressing the button again, once for each level. Access
guided treatment videos and more settings via the FOREO app.
3. TONE & LIFT
Lightly press both metallic spheres
to your skin, and slowly glide the
device upward and outward across
your cheekbones and forehead,
around your mouth and over your
jawline and neck, as desired.
THINGS TO NOTE:
•
Microcurrent devices like BEAR
™
2 go must be used with a conductive serum. For optimal results, we recommend using FOREO
SUPERCHARGED
™
Serum 2.0 — developed specifically for use with FOREO’s microcurrent devices, and clinically proven to
significantly increase type 1 collagen production.
• Leave a thin, mask-like layer of FOREO SUPERCHARGED
™
Serum on skin, so the device can glide smoothly. If treating many areas
in one session, you can apply the serum to each area before you use the device on that area.
• Never use microcurrent devices like BEAR
™
2 go on the midline bone of the neck, or within the orbital bone.
• Make sure that both microcurrent spheres are touching your skin during your treatment. Always glide the device in upward and
outward motions, from the center of your face toward your hairline.
HOW TO USE BEAR
™
2 go
UNLOCK YOUR DEVICE
Before first use, download the FOREO For You mobile app to unlock and register
your device. Follow these simple steps;
1. Download the FOREO For You app on your mobile phone.
2. Log in to your account or sign up for a new one.
3. Add device (on the top of your screen).
4. Choose device series.
5. Press and hold the universal button to connect your device to the mobile app.
6. Fill in the purchase information.
Note: BEAR
™
2 go’s default setting is ‘Beginner Mode’ (microcurrent intensity
levels 1 - 3). If you wish to access ‘Pro Mode’ (microcurrent intensity levels 4
- 6), you can do so via ‘Settings’ in the app. Once you select ‘Pro Mode’,
the intensity indicator lights on your device will refer to the Pro Mode levels
(4 - 6).
TYPES OF MICROCURRENT
BEAR
™
2 go features 2 types of microcurrent, unique to FOREO. Each has its own special benefit, and is implemented into
the video-guided treatments on the app, for optimized results.
Advanced Microcurrent
™
- Steady current stimulates muscles to strengthen them, while tightening skin above.
Lifting Microcurrent
™
- Repeatedly staggers current from low to high frequency, gently coaxing muscles into
naturally lifting, for a contoured look.
To Next Page
Loading...
