rect date and time on.
•
Language: Choose language for your device from the available.
•
Settings switch: Enable or disable the watch function.
•
LBS Location: Enable or disable location using network ope-
rators antennas.
•
Turn off watch remotely: watch will be turned off.
FAQ
The application does not receive commands and shows in-
formation that the watch is disconnected from the network.
– Check whether GMS signal is correct– whether the range columns
are available / visible on the display. - - - If they are crossed out,
please turn off your watch.
Check if the SIM card is properly installed in the watch, if it supports
2G internet and if there is an internet data package available.
Turn on the device. If the range columns are still crossed out, go to
the next point.
-
Check if there are data transfer arrows, if not, set APN (Access Point
Name - specific packet network, e.g. internet):
Please send a text message to the number of the watch with the con -
tent:
pw,123456,apn,YYYYY,,,XXXXX#
* the X character stands for digits of MNC and MCC codes assigned to
a specific operator, e.g .:
26003 – ORANGE
26001 – PLUS
26006 – PLAY
26002 – T-MOBILE
the remaining digits of the codes are available at manual/forever.eu or
www.mcc-mnc.com/
* Instead of the
Y
characters, enter
the operator's individual APN
name.
After sending the message,
wait several minutes for KidsWatch to
download the settings from the network
. Data transfer arrows will
appear.
To Next Page
Loading...
