9
GB
Screen rotation O/On
Car mode O/On
WIFI name WIFI name settings
WIFI password WIFI password settings
License number Settings
Delete Delete current/Delete all
Format Formatting a memory card
Factory settings Return to factory settings
Version Information about the software version
Connection with application
1. Download „FinalCam” app on your device. The application is in the Google Play Store and
Apple App Store.
2. Start the camera
3. Make sure that the camera is in recording mode.
4. Press the „Up” button to turn on the network.
5. In your device, connect to the network called „SC-210+” the full name of the network will be
displayed on the screen of the camera before connecting.
6. Enter the network password „12345678” - the password also will be displayed on the screen
of the camera before connecting.
7. Open the application on your phone.
8. Click the „+” at the top of the screen to add a new camera.
9. Select the camera.
To return to the normal operation of the camera (turn o Wi-Fi), press again the button „Up”.
Specication
Sensor AR0330
Chipset Novatek 966558G
Viewing Angles 170°
To Next Page
Loading...