8
8
For Parts, Service & Technical Assistance
Telephone: +44 (0) 1582 469797
Fax: +44 (0) 1582 469646
508DT/FS
Installation, Operating and Service Manual
.
.
.
Desktop / Floor-Standing
Vacuum Forming
Machines
E C Machinery Directive
2006/42/EC
Declaration of conformity
We hereby certify that the machinery stipulated below complies with all the relevant provisions
of the EC Machinery Directive and the National Laws and regulations adopting this Directive.
Modifications to this machinery without prior approval from the undersigned will render this
declaration null and void.
Machine Description: Vacuum Forming Machine
Machine Function: Thermoforming of Plastic Sheet
Model / Type: 508DT/FS
Serial Number:
Date of Manufacture:
Is in conformity with the provisions of the following other EC Directives:
2004 / 108/EC – EMC
2006 / 95/EC – LVD
Technical File Compiled by: A. Berry at address below.
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
Significant harmonised standards applied:
EN ISO 12100 : 2010
EN ISO13849-1:2006
EN 60204 –1 : 2006
EN 12409: 2008
______________________________________________________
Signed
Date: 15 October 2012
Name: Paul Vukovich
Position: Managing Director
Being the responsible person appointed by the manufacturer
User manual EC Certificate
of conformity
Your Formech Machine is supplied with:
Counter balance
weights (508FS)
Heater shed
Table mesh
Power Cable - 508DT
C19 to BS 1363 Plug (UK & Ireland)
C19 to CEE 7/4 Plug -Schuko Plug (EU)
C19 to Nema 6/15 Plug (North America)
Power Cable - 508FS
2.5mm, 3 Core – 3m
+ Power lead (508DT)
Introduction
To Next Page
Loading...
