2
-Do not place the product on an unstable platform, stand or desktop for use, so
that the product will not fall and cause serious equipment damage and
personal injury.
-Do not look directly at the lens when the product is working to avoid eye injury.
-Do not attempt to disassemble the product, as there is dangerous energy inside
that may cause personal injury.When servicing or repair is required, it must be
done by trained or authorized service personnel.
-Do not place this product in an upright position as it may tip over and cause
injury or damage.
-Do not expose this product to rain or moisture (the humidity requirement of the
working place of this product is 21%~81%).
Prevention of electric shock and fire hazard
-Using incorrect cables may affect the performance of the product and may even
lead to electric shock, fire, and other accidents.To ensure product performance and
safety, use the same type of cable as the original cable.
-Always use a power extension cord, if required, with a current rating not lower than
that of the existing product.Otherwise, it may cause the power cord to overheat
and even cause electric shock, fire and other accidents.
-Unplug this product during thunderstorms or when it is not used for a long period of
time to avoid damage to the equipment caused by lightning or power line surges.
-Do not place flammable items near this product to avoid fire.
-Do not block the lens with any object when this product is working, as this may
cause the object to overheat, deform or even catch fire.
-Do not place any objects around the ventilation holes and heat dissipation holes, as
this may cause heat to build up inside the product and cause a fire.
Instructions for safe operation
To Next Page
Loading...
