The two voices feature ve main parameters that can be modulated by the
sequencer, each corresponding to a specic element in the synthesizer voice.
Dyad also has four waveshapes to choose from- Sine, Triangle, Saw and Square.
The waveshape is selected by changing the Shape setting next to each voice's
Trig track.
The nal output of the voice gets sent through a DJ-style cut lter which can be
used to remove either high or low frequencies from the sound.
Each voice has a distortion effect which can be controlled using the slider
underneath the main control panel.
Hz – sets the frequency of the oscillator.
Tone - controls the lowpass lter cutoff frequency.
Noise - controls the balance between the oscillator and noise generator.
Zap - controls the intensity of the pitch envelope.
Decay - controls the decay time of the amp envelope.
Synth Voice
5
To Next Page
Loading...