The FM balance in Dyad affects which voice is being modulated by the other. The
oscillator of each voice is always routed to the linear FM input of the other, and by
turning the dial from the center point towards either I or II, it will increase the
modulation depth received by the oscillator in that voice.
The oscillators in Dyad feature thru-zero linear FM, which can be used to create
all sorts of interesting textures and tones by combining different waveshapes.
Mix controls the balance of the voice outputs which lets you put more emphasis
on one voice over the other, or completely remove one of them. Voice I is at the
top while voice II is at the bottom.
Synthesizer Voice
6
To Next Page
Loading...