38
Use and maintenance ATOMIZER ON VISION MULTIFUNCTION MACHINE
thosedisputesarisingfromthesupplycontractorinanyother
casewhereitisrequiredtheopinionofajudicialbody,theCourt
ofVicenzawilltheonlycompetent.
1.2.1 WARRANTY EXCLUSIONS
Thewarrantyisvoid(inadditiontowhatisshowninthesupply
contract):
- ifanerrorofmaneuverand/orcollisionduetotheOperator
occurs;
- ifthemaximumallowedpowerlimitisexceeded;
- ifthedamageisattributabletopoormaintenance;
- ifaccessoriesorapplicationsnotsuppliedortestedbythe
Manufacturerwereinstalledonthemachine;
- if,followingrepairscarriedoutbytheUserwithouttheconsent
oftheManufacturerorduetotheassemblyofnon-original
spareparts,themachineshouldundergochangesandthe
damagecouldbeattributabletosuchchanges;
- iftheinstructionsinthismanualhavenotbeenobserved;
- ifexceptionaleventsoccur.
Failure to comply with what is described in this manual,
operational negligence, incorrect use of the machine and
the execution of unauthorized changes are the cause of
cancellation, by the Manufacturer, of the warranty granted
to the machine, thus declining every and any liability for
direct and/or indirect damages due to the reasons given
above.
For any repairs or revisions that involve works of a certain
complexity, it is necessary to contact the Authorized Ser-
vice Centers that have specialized personnel or directly
the Manufacturer, which is however at complete disposal
to ensure prompt and accurate technical assistance and
what necessary to restore the full machine efciency.
Pay attention to the symbols listed below in this manual.
They report a possible danger situation.
DANGER: THIS SIGN WARNS THAT IF THE WOR-
KS DESCRIBED ARE NOT CORRECTLY CARRI-
ED OUT, THEY CAN CAUSE SERIOUS INJURY,
DEATH OR LONG-TERM RISKS FOR HEALTH.
WARNING: THIS SIGN WARNS THAT IF THE WOR-
KS DESCRIBED ARE NOT CORRECTLY CARRIED
OUT, THEY MAY RESULT IN SERIOUS INJURY,
DEATH OR LONG-TERM RISKS FOR HEALTH.
SECTION 1
Description and features of the machine
1.1 INTRODUCTION
Thismanualcontainsinformation,instructionsandwhatis
deemednecessaryfortheknowledge,properuseandnormal
maintenanceoftheATOMIZERinstalledontheVISIONmodel
multifunctionmachine,manufacturedby«FORT Unipersonale
Srl»basedinSossano(Vicenza)Italy,hereinafterreferredto
astheManufacturer.
Below are the terms ATOMIZER or even MACHINE, where
machine means the whole atomizer group installed on the
multifunction VISION machine. When using the ATOMIZER,
it is also required to refer to the instructions of the multi-
function VISION machine attached to the machine.
Thismanualcontentdoesnotcontainacompletedescriptionof
thevariousorgansnoradetailedexpositionoftheiroperation;
however,theUserwillndwhatisnormallyusefulforusein
securityandforagoodstorageofthemachine.
Fromperformanceandcompliancewithwhatisdescribedin
thismanual,theydependonthesmoothoperation,durability
andoperatingeconomyofthemachine.
1.2 WARRANTY
TheManufacturerwarrantsitsnewfactoryproductsforaperiod
oftwelve(12)monthsfromthedateofpurchase.
Theengineiswarrantedaccordingtothetermsandconditions
establishedbytheitsmanufacturer.
Verify,uponreceipt,thatthemachineisintactandcomplete.
Anycomplaintsmustbemadeinwritingwithin8(eight)days
fromthedateofreceiptofthemachine.
Thewarrantyincludesonlythefree-of-chargerepairorrepla-
cementofthosepartsthat,aftercarefulexaminationbythe
TechnicalDept.oftheManufacturer,arefounddefective(exclu-
dingtheelectricalparts,theworkingtoolsandconsumables).
AnyreturnsmustalwaysbeagreedwiththeManufacturer,and
shippedexworks.
Replacementsorrepairsofpartsunderwarrantywillnotextend
inanycasethetermsthereof.
Inanycase,thebuyermustpaythecostoftransport,lubricants,
VATandanycustomsduties.
Thebuyerwillbeabletoassertitsrightsontheguaranteeonly
ifithascompliedwithanyadditionalconditionsontheprovision
ofthewarranty,alsoreportedinthesupplycontract.
Ifitappearsthatthepartiesdonotintendtosubmittoarbitration