Need help?Do you have a question about the Fortin FSA-206 and is the answer not in the manual?
General| Brand | Fortin |
|---|---|
| Model | FSA-206 |
| Category | Remote Starter |
| Language | English |
Remote-start and stop the vehicle using the START button.
Locks doors, arms the anti-theft system and activates the alarm.
Unlocks doors, disarms the anti-theft system and deactivates the alarm.
Opens the trunk and deactivates the alarm temporarily.
Remote stop the vehicle using auxiliary and start buttons.
Controls auxiliary function 1 on the 5-button transmitter.
Controls auxiliary function 2 on the 5-button transmitter.
Safety precautions for indoor starting and manual transmission vehicles.
Recommendations for pre-setting climate controls and wipers for remote start.
Safety feature for manual transmissions to enable remote starting.
Steps to activate Ready Mode using parking brake.
Make sure all doors are closed and transmission is neutral.
Steps to activate Ready Mode using parking brake.
Engage the parking brake.
Release the brake pedal.
Press START button within 20 seconds.
Step-by-step guide to activate Ready Mode for manual transmissions.
Make sure transmission is in NEUTRAL position.
Engage the parking brake.
Release the brake pedal.
Remove key from ignition barrel.
Lock doors by pushing LOCK button.
Insert key and turn to ON/Run position.
Step on the brake pedal to disable remote-starter.
Procedure to cancel remote start using a 4-button transmitter.
Procedure to cancel remote start using a 5-button transmitter.
Allows vehicle to run without key in ignition for quick errands.
Turn key to ON/RUN position while engine is running.
Turn key to OFF and remove it from ignition.
Exit vehicle and lock doors.
Idle mode activation for manual transmission vehicles.
Steps to activate Idle Mode for manual transmissions.
Ensure transmission is in NEUTRAL and doors are closed.
Engage the parking brake.
Steps to activate Idle Mode for manual transmissions.
Release the brake pedal.
Press START button within 20 seconds.
Remove the key from the ignition barrel.
Exit vehicle and close all doors.
Lock the doors.
Push START button while engine is running.
Remove the key from the ignition barrel.
Exit vehicle and close all doors.
Press LOCK button to lock doors and run for 60 seconds.
Refers to Idle Mode activation steps for manual transmissions.
How to activate/deactivate Valet Mode using the switch without coded entry.
Insert key and turn to ON/RUN position.
Press Valet switch 3 times.
How to activate/deactivate Valet Mode with a coded entry.
Insert key and turn to ON/RUN position.
Press valet button 3-7 times based on code.
Press and hold valet button for 3 seconds.
Procedure to activate Valet Mode via remote.
Press LOCK and UNLOCK buttons simultaneously.
LED turns ON solid, indicating Valet Mode is active.
Procedure to deactivate Valet Mode via remote.
Press LOCK and UNLOCK buttons simultaneously.
LED turns OFF or starts flashing.
LOCK succeeded/failed responses.
UNLOCK succeeded/failed responses.
TRUNK succeeded/failed responses.
START/STOP succeeded/failed responses.
Flashing Red LED indicates alarm trigger.
Oscillating tone for 20 seconds indicates alarm trigger.
Zone on alarm triggered.
Press AUX button for one second.
LED starts flashing Blue.
Press AUX button again for one second.
Vehicle is LOCKED and ARMED.
Vehicle is UNLOCKED and DISARMED.
An alarm has been triggered on the vehicle.
The vehicle is running by remote-start.
Steps to activate Cold Start Timer Mode.
Various methods to disable Cold Start Timer Mode.
Controls the driver's side sliding door.
Controls the passenger's side sliding door.
Procedure to lock the second vehicle.
Procedure to unlock the second vehicle.
Procedure to start/stop the second vehicle.
Details on programmable options integrated during installation.
Steps to unlock doors and disarm the alarm.
Steps to lock doors and arm the alarm.
How the system provides audible confirmation of actions.
How to perform actions without audible confirmation.
How to perform actions with audible confirmation.
How the system indicates alarm triggers and status.
Indicates which zones are active when arming the alarm.
How the system handles zones triggering the alarm multiple times.
Details on the shock sensor and its behavior during remote start.
How to locate the vehicle or activate panic mode.
How to disable specific sensors causing false alarms.
Explains parking light flash codes for remote starter issues.
Diagnostic codes before remote start.
Diagnostic codes after remote start.
Explains parking light flash codes for alarm issues.
Diagnostic codes after alarm disarm.
To Next Page
