To Next PageTo Next Page
Need help?Do you have a question about the Fortin FTX900 and is the answer not in the manual?
General| Type | Remote Starter |
|---|---|
| Remote Start | Yes |
| Keyless Entry | Yes |
| Trunk Release | Yes |
| Panic Mode | Yes |
| Range | Up to 3000 feet |
| Smartphone Control | Optional |
| Data Immobilizer Bypass | Yes |
| Installation | Professional installation |
| Warranty | Limited lifetime warranty |
Describes the LED behavior on the remote transmitter when buttons are pressed or transmitting information.
Step-by-step instructions for starting the vehicle using the remote control.
Recommendations for pre-setting climate controls, wipers, and other accessories for remote start.
Default method to activate remote start sequence only when end user uses the remote starter.
Installer-programmed method to activate remote start sequence when leaving the vehicle.
Conditions that cancel Ready Mode, requiring reactivation for remote starting.
Allows the vehicle to run without the key after initial start for convenience.
Procedure for activating Idle Mode for vehicles with manual transmission.
Procedure for taking control of the vehicle after a remote start.
Instructions on how to stop the vehicle's remote start function.
Cools down the turbocharger by running the engine for a set duration after the driver leaves.
Procedure for activating Turbo Mode for manual transmission vehicles.
Disables remote start and alarm using a physical switch, often for service.
Procedure to activate/deactivate Valet Mode using the antenna switch.
Disables remote start and alarm using the remote transmitter.
Activates timed remote starts based on low temperatures.
Methods to turn off the automatic cold start timer function.
Controls the driver's side sliding door or other functions via the remote.
Controls the passenger side sliding door or other functions via the remote.
Disables all buttons on the remote transmitter for security.
Re-enables all buttons on the remote transmitter.
Lists programmable options affecting remote starter and alarm behavior.
Procedure to unlock doors and disarm the alarm system using the remote.
Procedure to lock doors and arm the alarm system using the remote.
Explains audible feedback for alarm signals and button presses.
Details how the alarm system responds to triggers and how to stop it.
Indicates active zones when the alarm is armed.
Automatically disables zones that trigger the alarm multiple times.
Describes the shock sensor's behavior and its interaction with remote-start.
Activates horn/siren and lights to help locate the vehicle.
Procedure to disable sensitive zones like shock, auxiliary, or tilt sensors.
