Fortin EVO-ONE FTX75 User Manual

ALL-IN-ONE DATA INTERFACE
REMOTE STARTER / ALARM
QUICK
INSTALLATION GUIDE
FTX75
D
C
B
H
I
J
(6-PIN) BYPASS RELAY
(5-PIN) CAN-BUS
(4-PIN) RS-232 DATA-LINK & FLASH-LINK UPDATER PORT
BYPASS PROGRAMMING BUTTON
REMOTE STARTER PROGRAMMING LED
CUT LOOP FOR
AUTOMATIC
TRANSMISSION
MODE.
Red White Blue
Blue
Black
LED Blue CAN ACTIVITY
LED Yellow IGNITION ON
LED Red
BYPASS DATA
E6
A
F
G
E
(+) Foot Brake Black In
750mA
(-) Parking Light Pink Out
750mA
(-) Trunk Release Yellow/Black Out
(-) Hand Brake Brown/White In
(-) Hood Status Pink/Black In
Bypass confi g.
Purple/Yellow
Bypass confi g.
Green/White
Bypass confi g.
Green/Red
Bypass confi g.
White/Black Out
Bypass confi g.
Lt.Blue
Ground Black In
(+) Ignition Pink Out
(+) Starter Yellow Out
Out White
(+) ParkLight/IGN2
/ACC/START
Programmable Output
(FUNCTION 2 & 31)
Out Orange
(+) ACC / IGN2
Programmable Output
(FUNCTION 2 & 31)
In Red (+) 12V
In Yellow (+) Bypass Ignition
Out Purple (-) Lock/Arm
750mA
Out Purple/White (-) Unlock/Disarm
750mA
Out Green (-) Ignition
750mA
Out White (-) Start
750mA
Out Orange (-) Disarm
750mA
Out Orange/Black (-) Horn/Siren
750mA
Out Dk.Blue (-) GWR
750mA
In Red/Blue
Bypass confi g.
Lt.Blue/Black
Bypass confi g.
750 mA MAXIMUM OUTPUT. Do not exceed the maximum current or permanent damage to the module
will occur that will not be covered under warranty.
(6-PIN) POWER CONNECTOR
(20-PIN) SECONDARY CONNECTOR
Copyright © 2014,
FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED
MADE IN CANADA
REV.:20141003
A1
E1
(3-PIN) Shock Sensor
(2-PIN) Valet/Programming Button
A20
WIRING / CONNECTION GUIDE
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
Black
White
White
White
(4-PIN) ANTENNA(4-PIN) DATA-LINK ANTENNA
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7
x5
x1
x1
Turn the
Ignition
on.
Press and
hold
the valet-
switch
until the LED
 ashes, then
release.
Press and
release the
valet-switch
 ve time. The
park-lights
will  ash to
con rm.
Press and
release the
brake pedal
once.
On each Transmitter
press and release
the
button then
press and release
the
button. The
park-lights will  ash
to con rm.
Press and
release the
brake-pedal
once.
Turn the
Ignition
off.
  
 
,   
  
 
WWW.FORTIN.CA
ONE
EVO-ONE

Fortin EVO-ONE FTX75 Specifications

General

Brand	Fortin
Model	EVO-ONE FTX75
Category	Remote Starter
Language	English

Summary

EVO-ONE Wiring and Connection Guide

20-Pin Secondary Connector Wiring

Details wiring connections for the 20-pin secondary connector.

6-Pin Power Connector Wiring

Details wiring connections for the 6-pin power connector.

Bypass Relay and Data-Link Connections

Covers bypass relay, CAN-BUS, data-link antenna, and RS-232 port connections.

Remote Transmitter Programming Guide

Step-by-Step Transmitter Pairing

Guide for programming up to four remote transmitters to the system.

Fortin EVO-ONE Function Programming

Programmable Outputs & Tachless Sensitivity

Configuration of programmable outputs and tachless sensitivity crank time.

Remote Starter Runtime & Add Remote

Settings for remote starter runtime duration and adding new remotes.

Door Lock, Unlock & Starter Kill

Configuration of door lock/unlock timing, safety locks, and starter kill activation.

Confirmation, Alarm & Smart Relocking

Settings for sound confirmation, alarm options, and automatic relocking.

Cold Start Timer & Diesel/Turbo Modes

Configuration of cold start timer and settings for diesel/turbo timer functionality.

Engine Supervision & Start Attempts

Configuration of engine supervision methods and maximum start attempts.

Master Reset, Special Apps & Hybrid Mode

Procedures for master reset, special application outputs, and hybrid vehicle settings.

Alarm Duration, Valet Code & OEM Remote Control

Settings for alarm duration, valet code, and OEM remote system control.

Ground Out, Manual Transmission & Trunk Output

Configuration of ground outputs, manual transmission modes, and trunk control.

Temperature Option & Input Configuration

Configuration of temperature-dependent start options and input settings.

EVO-ONE Ready Mode & System Diagnostics

Ready Mode Operation and Disabling

Instructions for engaging and disabling Ready Mode for manual transmission vehicles.

Valet Mode Entry and Exit Procedures

Steps for entering and exiting the system's Valet Mode.

Cold Start Mode Activation Steps

Steps to activate the Cold Start Mode using remote buttons.

Remote Start & Alarm Diagnostic Codes

Explains diagnostic codes indicated by parking light flashes for remote start and alarm events.