Fortin E400 User Manual

AUTOMATIC & MANUAL TRANSMISSION
REMOTE STARTER & ALARM
PROGRAMMING REMOTE TRANSMITTER(S)
WIRING / CONNECTION GUIDE
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
Red Black White Black Blue Blue
Programming LED
(4-pin) Antenna
(4-pin) RS-232 Data-Link
(2pin) Valet/Programming
Button
Shock Sensor (3-pin)
(4-pin) Antenna
White #14
Brown #18
Red #14
Red #14
Red #22
Power
Power
(utility)
Power
Parklights
Ign/Acc/Start
Tachometer
Foot-Brake
Door Pin Pos
Trunk/Hatch (open)
Lock
Starter
Parklight
(-) while running
Purple
White
Orange
White/Black
Dk. Blue
White/Red
Yellow/Red
Yellow/Black
Brown/White
Lt. Green
Lt. Green/Black
24
8
Ignition
Starter
I
gnition Switch
Aux.1
Aux.2
INPUT
OUTPUT
Arm
~
Cut loop for automatic
transmission mode.
External LED (2-pin)
Yellow #14
Orange #14
Pink #14
Black #18
Starter
Accessory
Ignition
Ground
Hood Pin
E-Brake
Door Pin Neg.
Trunk/Hatch Pin
Starter Kill
Unlock
Disarm
Ignition
Accessory
Horn
Siren
Aux.IN
Grey
Brown
Dk. Green
Pink
Yellow
White/Green
Yellow/Green
Pink/Black
Orange/Black
Red/Black
Red
Purple/White
1
1
To Vehicle
To Vehicle
Starter-Kill / Anti-Grind Relay
See programming guide, Function #10
Neutral Safety Switch for manual transmission vehicle
Optional Relay
Not Use
Lt.Blue
QUICK
INSTALLATION GUIDE
RF25BV/RF252W
COPYRIGHT © 2015-2016, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED MADE IN CANADA REV.:20161011
WIRING / CONNECTION GUIDE
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7
X1
X1 X1
Turn the
Ignition ON.
Press and hold the
valet switch until
the Parking lights
turn ON, the horn/
siren will chirp.
Press and release the
valet-switch once.
The
parking lights will
 ash to con rm.
Press and re-
lease the brake
pedal once.
On each Transmitter press
the LOCK button once
(maximum 4 transmitters),
the parking lights will  ash
to con rm.
Press and
release the
brake-pedal
once.
Turn the Ignition
OFF to exit
programming.
1 32 4
ONE
ONE
E400
ONE
ONE
GUIDE # 32501

Fortin E400 Specifications

General

Brand	Fortin
Model	E400
Category	Remote Starter
Language	English

Summary

Wiring and Connection Guide

Automatic Transmission Mode

Instruction to cut a wire loop for automatic transmission mode.

Neutral Safety Switch

Connection point for neutral safety switch in manual transmission vehicles.

Ignition Switch and Optional Relay

Diagram showing ignition switch and optional starter-kill/anti-grind relay.

Programming Remote Transmitter

Enter Programming Mode

Steps to enter remote transmitter programming mode via valet switch.

Learn Transmitters

Process of learning up to 4 transmitters by pressing LOCK button.

Exit Programming Mode

Steps to turn ignition OFF to exit programming mode.

Function Programming Steps

Select Mode and Enter Programming

Steps to select a mode and enter function programming via valet switch.

Select Function and Confirm

Steps to select functions and confirm settings by pressing brake pedal.

Exit Function Programming

Steps to turn ignition OFF to exit function programming.

Master Reset Procedure

Initiate Master Reset

Steps to initiate master reset using valet switch and ignition.

Confirm Master Reset

Steps to confirm master reset by pressing brake pedal and valet switch.

Exit Master Reset

Steps to turn ignition OFF to exit master reset procedure.

Programmable Function Overview

Smart Arming and Door Lock Functions

Configuration for smart arming, smart doorlock, and smart lock pulse.

Engine Supervision and Start Attempts

Settings for engine supervision methods and start attempt limits.

Transmission and Safety Switch Settings

Configuration for manual/automatic transmission, neutral safety switch.

Security Remote Starter Functions

Settings for remote starter activation, shutdown, and security features.

Remote Starting Procedures

Analog Tach Learning

Procedure for learning the analog tachometer signal for manual transmission.

Ready Mode for Manual Transmission

Steps to enable ready mode for manual transmission remote starting.

Disabling Ready Mode

Methods to disable ready mode for manual transmission safety.

Cold Start Mode Activation

Procedure to activate cold start mode by pressing UNLOCK and START.