Fortin E400 - Function Programming Steps; Select Mode and Enter Programming; Select Function and Confirm; Exit Function Programming

FUNCTION
MODE 1
DEFAULT
MODE 2
MODE 3 MODE 4
MODE 5
+
MODE 6
+
1 ADD REMOTE Program Driver 1 Program Driver 2 Multivehicle program — — —
2
Programmable
Output
(+) Ign/Acc/Start/
Park-Light
2nd Ignition 2nd Accessory 2nd Starter
Pink Ignition Pink Ignition Pink Ignition
Orange 2nd Ignition Orange Accessory Orange Accessory
White Starter White 2nd Ignition White Starter
Yellow
2nd Starter
Yellow
Starter
Yellow
2nd Starter
Brown Park-Light (+) Brown
2nd
Accessory
Brown 2nd Ignition
Aux. 1 Park-Light (-) Aux. 1
Park-Light
(-)
3 Tachless sensivity
Increase
crank time
(By default)
Decrease
crank time
4
Remote car starter
runtime
Gas: 15 minutes
Diesel: 30 minutes
Gas: 7 minutes
Diesel: 14 minutes
Gas: 3 minutes
Diesel: 6 minutes
— — —
5
—
— — — — — —
6 Lock/Unlock control No
Unlock before remote-
start & Lock after
remote-start.
Lock after remote-start.
Unlock and relock after
shut-down.
Relock 10 sec.after
shut-down.
Disarm before shut
down.
7
Ignition Lock/Unlock
control
No
Lock after foot-brake
& unlock after key is
turned off.
Unlock after key is turned
off.
Doorlock Output at
Ignition only.
— —
8 Unlock Pulse Time Single 0.25 sec Double 0.25 sec Single 4.0 sec Single 2.5 sec Single 1.5 sec Single 0.75 sec
9
Active or Passive
Alarm & Starter Kill
Active
Press LOCK to activate
the Alarm and starter-
kill.
Passive (Lock disabled)
Arm alarm activate
starter-kill 30(MODE
4), 60(MODE5), or
120(MODE6) sec. after
the door is closed.
Passive (Lock enabled)
Arm alarm, activate
starter-kill and lock
doors 30(MODE
4), 60(MODE5), or
120(MODE6) sec. after
the door is closed.
Passive arm
30 seconds (by default
if MODE 2 ot 3 is
activated.
Passive arm
60 seconds. (if MODE
2 ot 3 is activated.
Passive arm 120
seconds. (if MODE 2
ot 3 is activated.
10 Starter Kill Output Starter-kill &anti-grind Anti-grind only Relay normally open — — —
11
Sound con rmation
& LED antenne
1st LOCK/UNLOCK
silent - 2nd LOCK/
UNLOCK sound
---------------------------
Antenna LED active.
LOCK/UNLOCK
sound always.
Antenna LED disabled.
Antenna LED disabled
with ignition.
Con rmation sound at
LOCK only
Panic mode disabled
12
Horn/Siren
con rmation
Horn(-) only. Siren(+) only Siren(+) & Horn(-)
During alarm siren(+)
will pulse and horn(-) is
constant.
— —
13 Con rmation Pulse Long Short — — — —
14
Alarm ON/Off
Starter ON/Off
Alarm OFF
Remote-starter ON
Alarm ON
Remote-starter ON
Alarm ON
Remote-starter OFF
— — —
FUNCTION
MASTER RESET OF ALL PROGRAMMED FUNCTIONS AND REMOTES
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
Disarm
alarm,
disable valet.
Turn the Igni-
tion ON.
Press and hold the
valet switch until the
Parking lights turn
ON, the horn/siren
will chirp.
Press and
release
the valet
switch 23
times.
X1
Press and
release
the brake-
pedal once.
Press and hold
the valet switch
for 5 seconds. The
Parking lights will
flash to confirm.
Turn the Ignition OFF
to exit programming.
The Parking lights will
flash 4 times.
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
X1
MODE 1 - LOCK
MODE 2 -
UNLOCK
MODE 3 -
TRUNK
MODE 4 -
START
MODE 5 -
LOCK + UNLOCK
MODE 6 -
TRUNK + START
Disarm alarm,
disable valet.
Turn the Igni-
tion ON.
Press and hold
the valet switch
until the Parking
lights turn ON,
the horn/siren
will chirp.
Press and release the
valet switch X times for the
desired function. The Park-
ing lights will flash and the
horn/siren will chirp each
time to confirm.
Press and
release the
brake-pedal
once.
Turn the Igni-
tion OFF to exit
programming.
The Parking
lights will flash
4 times.
Press the BUTTON on a programmed remote to select the mode (X).
The Parking lights will flash 1-6 times to confirm.
Return to step 3 to programmed the next option
FUNCTION PROGRAMMING