To Next PageTo Next Page
Need help?Do you have a question about the Fortin E400 RF751W and is the answer not in the manual?
General| Battery Life | Up to 1 year |
|---|---|
| Range | Up to 3000 feet |
| Features | Keyless entry, remote start, security |
| Confirmation | Audible |
| Frequency | 433 MHz |
Details the primary power, ignition, and accessory wiring connections for the system.
Outlines connections for vehicle sensors like tachometer, brake, doors, and system outputs like lock/unlock.
Covers wiring for auxiliary functions and optional relays like starter kill.
Step-by-step guide to learn up to four transmitters into the system.
Procedure to erase all programmed remotes and restore factory default settings.
Instructions for enabling, using, and disabling Ready Mode for manual transmission vehicles.
Guide to enable and disable the Cold Start Mode for optimal low-temperature operation.
Steps to disarm the system and enter or exit Valet mode.
Explains the Ready Mode setup for vehicles with a neutral safety switch.
Procedure for learning the vehicle's tachometer signal via the analog wire.
Interpreting parking light flashes for remote start and alarm diagnostics.
Guide on how to select system modes 1 through 6 using a remote button.
Details programming for programmable outputs, sensitivity, and starter runtime.
Programming options for vehicle lock/unlock behavior and ignition control.
Configuration for alarm arming, starter kill output, and confirmation sound/LEDs.
Settings for engine supervision methods (Tachless, Analog Tach, Data-Link) and start attempts.
Configuration for special applications, auxiliary outputs, manual transmission, and valet code.
Details specific programmable outputs and configuration wire functions.
Settings for security remote starter applications and controlling the system via OEM remote.
