Fortin E400 RF751W - Remote Transmitter Management; Programming New Transmitters; Erasing All Transmitters and Resetting

PAGE 2
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maximum of 4 transmitters.
Any transmitters can be stored in more than 1 memory slot.
When a 5
th
transmitter is learned the 1
st
remote is erased (FIFO).
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
WITH IGNITION SWITCH
Turn the Ignition OFF.
Turn the
Ignition ON.
F
M
H
2
-
W
The LED
will turns
ON
X4
Press and
release the
brake pedal
four times.
F
M
H
2
-
W
Turn the
Ignition
ON.
WITH VALET SWITCH
Press and hold the valet
switch until the parking
lights turn ON, the horn/
siren will chirp.
X5
Press and release the valet
switch five time.
The parking lights will flash and
the horn/siren will chirp each
time to confirm.
X1
Press and
release the
brake pedal
once.
The
LED will
flash
rapidly.
On each Transmitter
press and release the button
then press and release the
button.
F
M
H
2
-
W
The LED will stop
flashing for a
second confirming
programming.
Turn the
Ignition
OFF to exit
program-
ming.
ERASES ALL REMOTES THAT HAVE BEEN PROGRAMMED AND RESETS ALL FUNCTIONS BACK TO DEFAULT.
Disarm the
system
(The
antenna
led must
not be
flashing,
see enter/
exit valet
mode p.7).
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6
Turn the
Ignition
ON.
OR
Press and hold
the valet switch
or the antenna
button until the
Parking lights turn
ON, the horn/siren
will chirp.
OR
Press and
release the
valet switch
or the antenna
button
23 times.
X1
Press
and
release
the
brake-
pedal
once.
OR
Press and
hold the valet
switch or the
antenna button
for 5 SECONDS.
The Parking
lights will flash
to confirm.
Turn the Igni-
tion OFF to
exit program-
ming. The
Parking lights
will flash
4 TIMES.
F
M
H
2
-W
23X
23X
F
M
H
2
-W
F
M
H
2
-W
Within 5 sec.