8
Connecting the phone
1. Connect the handset cord to the handset jack on the phone.
2. Optionally, connect an amplified headset to the
jack.
3. Connect the WAN port
to the network with the provided Ethernet cable.
4. Optionally, connect your desktop PC to the PC port
with an Ethernet cable
(notsupplied).
5. If the network supports PoE, a power adapter is not required. The phone requires
9W to function with PoE. If PoE is not supported on the network, connect the power
adapter to the DC 5V 2A power jack.
To Next Page
Loading...
