FortiGate-3000 and FortiGate-3600 FortiOS 3.0MR4 Install Guide
62 01-30004-0270-20070215
Testing a new firmware image before installing it FortiGate Firmware
11 Enter the firmware image file name and press Enter.
The TFTP server uploads the firmware image file to the FortiGate unit and
messages similar to the following appear.
• FortiGate unit running v2.x BIOS
Do You Want To Save The Image? [Y/n]
Type n.
• FortiGate unit running v3.x BIOS
Save as Default firmware/Run image without saving: [D/R]
or
Save as Default firmware/Backup firmware/Run image without
saving: [D/B/R]
12 Type R.
The FortiGate image is installed to system memory and the FortiGate unit starts
running the new firmware image, but with its current configuration.
13 You can log into the CLI or the web-based manager using any administrative
account.
14 To confirm the new firmware image has been loaded, from the CLI enter:
get system status
You can test the new firmware image as required.
To Next Page
Loading...
Need help?
General