FortiGate-3016B, FortiGate-3600A and FortiGate-3810A FortiOS 3.0 MR5 Install Guide
26 01-30005-0343-20071113
Transparent mode default network configuration Factory defaults
Transparent mode default network configuration
In Transparent mode, the FortiGate unit has the default network configuration
listed in Table 6 on page 26.
Table 5: Factory default NAT/Route mode network configuration
Administrative
account
User name: admin
Password: (none)
IP: 192.168.1.99
Port 1 Netmask: 255.255.255.0
Administrative Access: HTTPS, Ping
IP: 0.0.0.0
Port 2 Netmask: 192.168.2.99
Administrative Access: Ping
IP: 0.0.0.0
Ports 3-10
Ports 3-18 (FortiGate-3016B)
Netmask: 0.0.0.0
Administrative Access: Ping
Default Gateway (for default route) 192.168.100.1
Interface connected to external network
(for default route)
port 1
Default Route
A default route consists of a default gateway and the
name of the interface connected to the external network
(usually the Internet). The default gateway directs all non-
local traffic to this interface and to the external network.
Network Settings
Primary DNS: 65.39.139.53
Secondary DNS: 65.39.139.63
Table 6: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 0.0.0.0
Netmask: 0.0.0.0
DNS
Primary DNS server: 65.39.139.53
Secondary DNS server: 65.39.139.63
Port 1 HTTPS, Ping
Administrative access Port 2-10
Ports 2-18 (FortiGate-3016B)
Ping
To Next Page
Loading...
