Fortinet FortiGate FortiGate-500 - User-Defined Interface Connections

NAT/Route mode installation Connecting the FortiGate unit to the network(s)
FortiGate-500 Installation Guide 01-28004-0023-20040830 37
Figure 9: FortiGate-500 NAT/Route mode connections
User-defined interface connections
To connect to FortiGate-500 user-defined interfaces
1 Connect the user-defined interface to the hub or switch connected to the intended
network.
2 Repeat for all user-defined interfaces that you have configured.
The example in Figure 10 shows an internal network connected to user-defined
interface 1 and an external network connected to user-defined interface 4.
Esc Enter
HADMZINTERNAL EXTERNAL
1234 5 678
Internet
Internal
External
DMZ
FortiGate-500
Internal Network
DMZ Network
Mail Server
Web Server
Hub or Switch
Public Switch
or Router