2322
Setup
WiFi or USB Setup
USB port
Note: For USB conguration, follow the on-screen instructions of your
mobile device for USB authorization settings
Important: For wireless setup, ensure FortiExplorer is on the same wireless
network as the Foritnet appliance; the default host and password are shown
on your Fortinet device sticker
HTTPS
BIOS Options
The FortiRugged 60F provides an option in the BIOS menu to set the CPU
speed from high performance mode (default) to low power mode. See the
admin guide on docs.fortinet.com for more information.
1. During OS bootup, press any key to enter the BIOS menu
2. Type I for the System Information menu
3. Type F for the CPU frequency menu
4. Type
0 for Low power mode or 1 for High performance mode
5. Type Q to exit the BIOS
To Next Page
Loading...
Need help?
General
