FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
20 13-12000-406-20081031
Expanding or renewing service Setup
Renewing contracts
If you want to extend the service period, you can add a renewal contract to the
previous contract.
To add a renewal contract
1 Go to the Fortinet Technical Support web site and log in.
2 Select FortiGuard Analysis & Management Services from the menu on the left.
3 Select the Service Account ID to which you want to apply the contract number.
Figure 7: Locating the Service Account ID
Near the bottom of the page, a serial number list appears.
4 Select the Serial Number of the contract that you want to renew.
5 In the Product/Contract Maintenance area, enter the Contract Number.
Note: Contract renewal requires an existing contract. If you have not yet added your first
contract, add the first contract, then add the renewal contract. For more information, see
“Obtaining a trial contract” on page 14 and “Adding purchased contracts” on page 21.
To Next Page
Loading...