Fortinet FortiGuard Analysis and Management Service 1.2.0 - Topology Tool

Management Topology Tool
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
13-12000-406-20081031 49
Figure 25: Network diagram in Edit mode
Within the Topology Tool section, additional menus allow you to access network
diagrams and customize the view. These additional menus differ between View
mode and Edit mode, but you can access them the same way. For example, to
open a saved network diagram, go to File > Open.
View Mode menus
File Contains the following menus:
• Open
• Close
View Contains the following menus:
• Zoom In
• Zoom Out
• Hide Grid
• Edit Mode
Help Contains the About menu. This displays
the firmware version of the Topology
Tool.
Edit Mode menus
Topology Tool section menus
Drawing Tools