Troubleshooting Page 142 FortiRecorder 2.4.2 Administration Guide
Figure 10:Converting sniffer output to .pcap format
15.Open the converted file in your network protocol analyzer application. For further
instructions, see the documentation for that application.
Figure 11:Viewing sniffer output in Wireshark
For additional information on packet capture, see the Fortinet Knowledge Base article Using
the FortiOS built-in packet sniffer.
Resource issues
If the system resource usage appears to be abnormally high according to the System Resource
widget on the dashboard or the CLI command:
get system status
you can view the current consumption by each process by entering this CLI command:
diagnose system top 10
To Next Page
Loading...