Camera settings Page 39 FortiRecorder 2.4.2 Administration Guide
Camera groups
After you have configured the cameras, you can group them to facilitate the camera
management. When you add administrators/operators/viewers later on, you can specify the
camera group they can access, instead of single cameras. For details, see “User management”.
To configure camera groups, go to Camera > Configuration > Camera Group.
Storage Options You can select the storage options of both continuous
recordings and detection recordings.
• Keep — Retain video until all available disk space is
consumed
• Delete — Remove video when it exceeds a maximum age.
• Move — Relocate video to external storage when it
exceeds a maximum age. This option appears if you have
configured network storage (see “External storage”).
If you choose to delete old video, also configure the maximum
amount of time to keep video recording files from this camera.
Files whose start time is older than this age will be deleted in
order to free disk space for new video recordings.
Continuous recordings will be stored on the hard disk as
multiple video files. In that case, the oldest part of the
recording will be deleted first.
Compression Options Select whether or not FortiRecorder compresses continuous
recordings.
If compression is enabled, also configure the maximum
amount of time to keep the files uncompressed. Files whose
start time is older than the specified time will be compressed.
Note: Selecting Compress will save storage space at the cost
of video quality.
Setting name Description
To Next Page
Loading...