NVR configuration Page 27 FortiRecorder 2.4.2 Administration Guide
you may need to wait a couple of seconds, then click Refresh to update the display in
System time.)
If the NTP query fails, the system clock will continue without adjustment.
If FortiRecorder’s time was 3 hours late, for example, and NTP fails, the time will still be
exactly 3 hours late. Verify your DNS server IPs, your NTP server IP or name, routing, and
that your firewalls or routers do not block or proxy UDP port 123.
See also
• Connectivity issues
NTP on FortiRecorder complies with RFC 5905. If the current system time differs greatly from
the actual time, NTP will adjust the clock slowly to avoid incongruous jumps in log message
timestamps and other time-dependent features. If you want the time to be corrected
immediately, set the time zone and time manually first, then switch to NTP.
NTP queries may fail until you have configured gateway and DNS settings. See “Configuring the
network settings”.
To Next Page
Loading...