Appliance Setup
1. Go to ADMIN > License > Nodes.
2. Select Worker from the drop-down list and enter the Worker's IP address and host name. Click Add.
3. See ADMIN > Health > Cloud Health to ensure that the Workers are up, healthy, and properly added to the
system.
Installing Collectors
Once Supervisor and Workers are installed, follow the same steps in All-in-one Install to install a Collector except only
choose OS and OPT disks. The recommended settings for Collector node are:
l CPU = 4
l Memory = 8GB
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 17
Fortinet Inc.
To Next Page
Loading...
