Fortinet FortiSIEM 2000G - Appliance Setup; All-In-One Installation; Step 1: Rack Mount the FSM-2000 G Appliance

Appliance Setup
Follow the steps below to setup FSM-2000G appliance.
l
All-in-one Installation
l
Cluster Installation
All-in-one Installation
Follow these steps to install all of the FortiSIEMcomponents at one time.
l
Step 1: Rack Mount the FSM-2000G Appliance
l
Step 2: Power On the FSM-2000G Appliance
l
Step 3: Verify System Information
l
Step 4: Configure FortiSIEM via GUI
l
Step 5: Generate the FortiSIEM FSM-2000G License Key File
l
Step 6: Register the FortiSIEM License
l
Step 7: Accessing FortiSIEM UI
l
Step 8: Choose an Event Database
Step 1: Rack Mount the FSM-2000G Appliance
1. Follow FortiSIEM 2000G QuickStart Guide located here to mount FSM-2000G into the rack.
2.
Insert solid state drive disks (SDD) and hard drive disks (HDD)into the positions as shown below:
Connect FSM-2000G to the network by connecting an Ethernet cable to Port 0.
Before proceeding to the next step, connecting Ethernet cable to Port 0 is required for
Network configuration.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 5
Fortinet Inc.