Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 144

- 144 -
Syntax
show queue ets weight <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Name of the interface to which the ETS is enabled.
Weight : ETS weight in percentage.
7.2.17.4 show queue ets pg-mapping
This command displays ETS function on specific interface for the entire system.
Syntax
show queue ets pg-mapping <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Name of the interface to which the ETS is enabled.
pg-mapping: ETS priority to priority group mapping list.
7.2.17.5 queue ets
The ETS function is disabled by default. Only after enabling it, the ETS process also starts.
Syntax
queue ets
no queue ets
no - This command disables ETS function.