Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Outbound SSH Login Timeout (in minutes) Indicates the number of minutes an outbound ssh
session is allowed to remain inactive before being logged off. A value of 0, which is the default,
results in no timeout.
Maximum Number of Outbound SSH Sessions Indicates the number of simultaneous outbound
ssh connections allowed.
Allow New Outbound SSH Sessions Indicates whether outbound ssh sessions will be allowed.
7.3.5 SNMP Server Commands
7.3.5.1 show snmp
This command displays SNMP community information.
Six communities are supported. You can add, change, or delete communities. The switch does not have
to be reset for changes to take effect.
The SNMP agent of the switch complies with SNMP versions 1, 2c, and 3 (for more about the SNMP
specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to an external SNMP
manager based on the SNMP configuration (the trap receiver and other SNMP community parameters).
To Next Page
Loading...
