- 270 -
CDP Holdtime (sec): The length of time a receiving device should hold the L2 Network Switch CDP
information before discarding it
CDP Transmit Interval (sec): A period of the L2 Network Switch to send CDP packet
Ports: Port number vs CDP status
CDP: CDP enable or disable
7.9.1.2 show cdp neighbors
This command displays the CDP neighbor information.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Device Id: Identifies the device name in the form of a character string.
Local Interface: The CDP neighbor information receiving port.
Holdtime: The length of time a receiving device should hold CDP information before discarding it.
Capability: Describes the device's functional capability in the form of a device type, for example, a
switch.
Platform: Describes the hardware platform name of the device, for example, Fortinet the L2 Network
Switch.
Port Id: Identifies the port on which the CDP packet is sent.
7.9.1.3 show cdp neighbors detail
This command displays the CDP neighbor detail information.
To Next Page
Loading...
