Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 359

- 359 -
Syntax
arp access-list <acl-name>
no arp access-list <acl-name>
no - This command deletes a configured ARP ACL.
Default Setting
None
Command Mode
Global Config
7.20.2.8 permit ip host mac host
This command configures a rule for a valid IP address and MAC address combination used in ARP
packet validation.
Syntax
permit ip host <sender-ip> mac host <sender-mac>
no permit ip host <sender-ip> mac host <sender-mac>
no - This command deletes a rule for a valid IP and MAC combination.
Default Setting
None
Command Mode
ARP Access-list Config
7.20.2.9 clear ip arp inspection statistics
This command resets the statistics for Dynamic ARP Inspection on all VLANs.
Syntax
clear ip arp inspection statistics
Default Setting
None