Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 457

- 457 -
8.3.2.24 capability opaque
Use capability opaque command to enable Opaque Capability on the Router. The information
contained in Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to
distribute information throughout the OSPF domain. Supports the storing and flooding of Opaque LSAs
of different scopes. Use no capability opaque command to disable opaque capability on the router
Syntax
capability opaque
no capability opaque
Default Setting
Disabled
Command Mode
Router OSPF Config Mode
8.3.2.25 clear ip ospf
Use this command to disable and re-enable OSPF.
Syntax
clear ip ospf
Default Setting
None
Command Mode
Privileged Exec
8.3.2.26 clear ip ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Syntax
clear ip ospf configuration
Default Setting
None
Command Mode
Privileged Exec