Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 474

- 474 -
8.5.2.2 ip rip
This command enables RIP on a router interface.
Syntax
ip rip
no ip rip
no - This command disables RIP on a router interface.
Default Setting
Disabled
Command Mode
Interface Config
8.5.2.3 auto-summary
This command enables the RIP auto-summarization mode.
Syntax
auto-summary
no auto-summary
no - This command disables the RIP auto-summarization mode.
Default Setting
Disabled
Command Mode
Router RIP Config
8.5.2.4 default-information originate
This command is used to set the advertisement of default routes.
Syntax
default-information originate
no default-information originate