The main structure of the treadmill you purchased has already been assembled in the
factory. It can simply be used when plugged in. The following operations are how to use
handrails and how to fold and unfold them.
1. Lift the treadmill out of the box and place it on a level surface (Make sure there is a
50cm open space before and after the treadmill to fold and place the power cord.
etc.)
2. Pull up the handle bar in the direction of the arrow until the foot switch hooks the
handle bar.
3. As shown below, the tail of the treadmill can be raised with both hands to move
forward and backward, which is only suitable for short-distance movement within
the room.
4. Tu r n on the power, turn on the switch and turn on the treadmill and enjoy the
exercise.
To Next Page
Loading...
