3
OPERATION INSTRUCTION
*Connect the power cord to the correct power supply (220-240V, ~50Hz).
1. Press the ON/OFF button to turn on the dehumidifier and the power indicator will be on. Press the
ON/OFF again to turn off the dehumidifier and the power indicator will be off.
2. Press the humidity setting button to set the desired dehumidifying mode: continuous (CNT),
humidity 40%, 50%, 60% or 70% and the relative mode indicator will be on.
3. Press the wind speed button to set the wind speed. The high wind speed indicator will be on if high
wind speed is selected. The low wind speed indicator will be on if low wind speed is selected.
4. Press the TIMER button in ON mode to set the auto off timer (1-24 hours) and the LED display
will show the set auto off time. The auto off timer will add 1 hour for each press. The LED display
will be returned to the room humidity after 8 seconds.
5. Press the temperature display button and the LED display will show the room temperature .The
LED display will be returned to the room humidity after 8 seconds.
6. Press the dryer button to turn on the dryer function and the dryer indicator will be on. The
dehumidifier will be operated in high wind speed and continuous dehumidifying, it could help to
dry the laundry.
7. Press the TIMER in OFF mode to set the auto on timer (1-24 hours) and the LED display will
show the set auto on time. The auto on timer will add 1 hour for each press.
8. Press ION- & UV button to start the function of ION- & UV and the ION- & UV indicator will be
on.
9. Ambient humidity indicator :
Blue light – room humidity > 70%
Green light – room humidity = 50%-70%
Red light – room humidity < 50%
Red light flash – water full alarm
To Next Page
Loading...
Need help?
General
