4
DRAINAGE INSTRUCTION
While the water tank is full, the compressor and fan will stop operating and the water tank full indicator
will be on. Please empty the water tank.
*Disconnect the appliance from power source before removing the water tank.
1. Remove the water tank carefully.
2. Empty the water tank.
3. Insert the water tank gently back into the appliance.
CONTINUOUS DRAINAGE
1. Pull out the water tank (Fig.1).
2. Connect the drain hole with an 11mm inner diameter water tube (Fig.2).
*Please purchase the water tube.
3. Ensure another side of the water tube is in right place for continuous drainage.
*Note: Precautions should be taken to prevent the water tube from freezing in very cold weather
conditions.
4. Put the water tank back to its position. Otherwise, operation cannot be started.
Fig. 1 Fig. 2
To Next Page
Loading...
Need help?
General
