EasyManua.ls Logo

Fortress Technologies FFS2014 - First Time Use; How to Use

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
FIRST TIME USE
1. Remove the appliance and all accessories from the box.
2. Peel off the adhesive labels, if any.
3. Wash the Lid, Steaming Bowl, Steaming Compartments, Steam Diffuser, Flavor Scented Screen and Drip Tray in
warm soapy water.
4. Rinse and dry thoroughly.
5. Wipe the base with a damp cloth.
HOW TO USE
1. Place the appliance on a firm and stable surface, and allow sufficient ventilation.
2. Fill the water tank with cold tap water up to MAX level, as below Fig 1 or Fig 2.
Fig 1: Through water inlet Fig 2: Directly into the water tank
3. Place the drip tray on the base and make sure that it is positioned properly.
4. You may place herbs or spices into the Flavor Scented Screen for additional desired flavor.
Flavor Scented Screen Tips:
Add fresh or dried herbs to the flavor scenter screen to spice up the foods.
When Using The Flavor Scented Screen.
Try the suggested flavoring listed in the Steaming Chart & Recipes or use your favorite herbs to
create new combinations.
Flavor suggestions are for 1/2 to 3 teaspoons of dried herbs or spices. If using fresh herbs, shred
the herbs and triple the amount.
To prevent small herbs or ground spices from falling through the flavor scenter screen, rinse or wet
the screen before adding seasoning.
WARNING:
Do not add any salt, pepper, seasonings, herbs, wine, or any liquid other than tap water to the water
tank. This may damage the appliance permanently.