Fortress Technologies FWAC08M13 User Manual

6
Control Panel
The control panel will look like the following:
NOTE: The outline of the operation panel is based on typical model, the function is same with the actual
machine while some difference may exist in appearance.
Type 18000Btu/h
Types 7000~12000Btu/h
SELECTOR
SELECTOR
OFF
HIGH
COOL
MED
COOL
LOW
COOL
HIGH
FAN
LOW
FAN
Cool Mode
The desired cool setting is selected by rotating the knob
to the right to the appropriate location.
HIGH COOL has maximum cooling effect and airflow.
MED COOL has the intermediate cooling effect and
airflow.
LOW COOL has minimum cooling effect and airflow.
OFF will completely shut off the unit.
Fan Mode
( HIGH FAN, MED FAN, LOW FAN )
Rotate the knob to select your choice of fan speeds for
air circulation.
Note:
1. When selecting a fan speed, the compressor will not run.
2. When change the cool mode from "LOW COOL" to
"HIGH COOL", rotate the knob as slow as possible.
Do not change the operation mode between "LOW COOL"
and "HIGH COOL" too often.
OPERATION INSTRUCTION
OFF
HIGH
COOL
MED
COOL
LOW
COOL
HIGH
FAN
MED
FAN
LOW
FAN
Types 7000~12000Btu/h
Type 18000Btu/h
THERMOSTAT
AUTO SWING
SELECTOR
OFF
ON
HIGH
COOL
MED
COOL
LOW
COOL
HIGH
FAN
LOW
FAN
PLEASE WAIT THREE MINUTES BEFORE RESTARTING
OFF
PLEASE WAIT THREE MINUTES BEFORE RESTARTING
THERMOSTAT
SELECTOR
COOLER
TEST MODE
AUTO SWING
ON
OFF
OFF
HIGH
COOL
MED
COOL
LOW
COOL
HIGH
FAN
MED
FAN
LOW
FAN
TEST MODE
COOLER

Fortress Technologies FWAC08M13 Specifications

General

Brand	Fortress Technologies
Model	FWAC08M13
Category	Air Conditioner
Language	English