4.
Press and hold any button on the Remote Control. The Remote Control
is visible in the Bluetooth network and can be connected during this
time.
5.
Use the RIGHT (6)and LEFT (8) buttons to select the remote control
from the dropdown list that appears.
6.
Confirm your selection with a short press of the M (7) button.
Notes:
Once paired, the Remote Control can operate the Pulsar device.
Going forward, the Remote Control will automatically connect to the
paired device when within visible range.
The name of the remote control and its battery charge level will appear
in the list of paired devices at the bottom of the display in the
Bluetooth section of the menu.
To Next Page
Loading...