2 Physical Description1 Installation Notice
Package Contents
4.1 Wired Connection(Recommended)
4.2 Wireless Connection
There are two methods, wired and wireless connection, for
you to add IP camera via Foscam APP. You can choose
either of them:
3 Download APP 4 Add IP Camera
Scan QR code
If you have a QR Code APP on your smartphone, scan
the code below.
Download from App store
You can search the term “Foscam” directly on the APP
Store or Google Play Store. Then find the APP that
appears with the same icon as shown above, and install
it to your smartphone.
Make sure your wireless router is enabled DHCP, and
connected to internet.
Make sure your smartphone is connected to your
wireless router and located near the camera.
Before you continue, please note:
1.
Connect the camera with power adapter, and wait for a
moment, until the camera plays a sound “Hello, Foscam”.
2.
Connect the camera with router by Ethernet cable, and
then the camera will play a sound ” Wired connection
succeed”.
3. Make sure your smartphone is connected to your wireless
router.
1.
Connect the camera with power adapter, and wait for a
moment, until the camera plays a sound “Hello, Foscam”.
2. Make sure your smartphone is connected to your wireless
router.
3.
Run the Foscam APP on your smartphone, register
a Foscam Cloud account then log in. After the camera
plays a sound ”Ready for WiFi configuration”, please
follow the steps below to add your camera.
4. Run the Foscam APP on your smartphone, register
a Foscam Cloud account then log in. Please follow the
steps below to add your camera.
Scan the
QR code
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
Album
Scan
Tap here
Tap here
Connection
succeeded!
Tap ‘+’ to add new camera
Add New Camera
My Cameras
Tap to scan QR Code
Please scan the QR code on
your camera to add.
Setup Wizard
轻触扫描二维码
√
Connection succeeded！
Tap the camera in the list to
watch live video.
Setup Wizard
To install the Foscam APP on your smartphone, you can
choose either of the following methods:
Foscam
Front View
Rear View
Note:
Do not connect the camera with router via Ethernet cable.
Security Warning
Please change the password of your camera regularly,
and use the combination of numbers, letters and special
characters.
We recommend you to update your camera to the latest
firmware every three months, in order to ensure the
safety of your camera and have a better product
experience.
Please keep the username and password of your camera
safe, and do not tell them to others.
Note:
If you have added your IP camera successfully by wired connection,
please do not add it again by wireless connection.
Quick Installation Guide
Indoor HD IP Camera
V1.7
Model: C1
Warranty Card
Quick Installation Guide
Indoor HD IP Camera
Model: C1
Micro SD Card Slot
Network light
Power light
Microphone
Infrared LED
Lens
PIR
LAN
WPS/Reset
SoftAP
Power
WPS
WiFi
IP Camera
AC Adapter
Quick Installation Guide
USB Power Cable
You can download the QIG in other languages from
http://www.foscam.com/download/QIG.html .
To Next Page
Need help?
General
Weight and Dimensions
