Need help?Do you have a question about the Foscam C1 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Placement supported | Indoor |
| Connectivity technology | Wired & Wireless |
| Form factor | - |
| Mounting type | Desk/Ceiling |
| Product color | Black |
| Maximum resolution | 1280 x 720 pixels |
| Video formats supported | H.264 |
| Minimum illumination | 0 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/4 \ |
| Motion sensor | Yes |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Night vision distance | 8 m |
| Wi-Fi standards | 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11d, IEEE 802.11g, IEEE 802.11n |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Power consumption (typical) | 3 W |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 70 mm |
| Weight | 170 g |
Guides on connecting the camera to a wireless network using various methods.
Configuration steps for accessing the camera remotely over the internet.
Network configuration options including IP, DDNS, UPnP, and port settings.
Detailed steps for connecting the camera to a Wi-Fi network.
Settings for managing video recording, storage locations, and schedules.
System operations like backup, restore, firmware upgrade, and factory reset.
To Next Page
