To Next PageTo Next Page
Need help?Do you have a question about the Foscam FI8904W and is the answer not in the manual?
General| Maximum resolution | 640 x 480 pixels |
|---|---|
| Supported video modes | 480p |
| Video formats supported | M-JPEG |
| Supported graphics resolutions | 320 x 288 (QVGA), 640 x 480 (VGA) |
| Minimum illumination | 0.5 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/4 \ |
| Optical zoom | - x |
| Security algorithms | WEP, WPA |
| Built-in HDD | No |
| Night vision distance | 20 m |
| Type | IP security camera |
| Certification | CE, FCC |
| Placement supported | Outdoor |
| Connectivity technology | Wireless |
| Form factor | - |
| Product color | Silver |
| Protection features | Water resistant |
| Ethernet LAN (RJ-45) ports | 1 |
| Wi-Fi standards | 802.11b, 802.11g |
| Cabling technology | 10/100Base-T(X) |
| Wi-Fi data rate (max) | 54 Mbit/s |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -10 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Minimum RAM | 256 MB |
| Minimum processor | 2.0GHZ |
Weight and Dimensions| Depth | 228 mm |
|---|---|
| Width | 128 mm |
| Height | 108 mm |
| Weight | 1000 g |
Highlights the core functionalities and technical capabilities of the IP camera.
Describes the main interface for live viewing, settings, and camera controls.
Enables simultaneous viewing and management of multiple cameras.
Configures essential network parameters like IP address and gateway.
Guides setting up the camera's Wi-Fi connection and security.
Configures Dynamic DNS for remote access using a domain name.
Configures motion detection sensitivity and alarm triggers.
Instructions for installing and using the Foscam mobile app on Android devices.
Addresses common issues like forgotten credentials, connection errors, and display problems.
