Need help?Do you have a question about the Foscam FI8906W and is the answer not in the manual?
General| Model | FI8906W |
|---|---|
| Category | IP Camera |
| Field of View/Viewing Angle | 60° |
| Night Vision | Yes |
| Wireless | 802.11b/g |
| Ethernet | 10/100 Mbps |
| Video Format | MJPEG |
| Frame Rate | 30fps |
| Flip Image | Yes |
| Operating Temperature | -10°C to 50°C |
| Connectivity | Wi-Fi, Ethernet |
| Display Resolution | 640 x 480 |
| Resolution | 640x480 (VGA) |
| Lens | 3.6mm |
| Minimum Illumination | 0 Lux (With IR Illuminator) |
| Wireless Security | WEP, WPA, WPA2 |
| Protocols | TCP/IP, HTTP, SMTP, FTP, DHCP, DNS, DDNS, UPnP, NTP |
| Power Supply | DC 5V |
Lists the main features of the IP camera.
Describes the main video display and control interface.
Enables viewing multiple cameras simultaneously.
Configures static IP, subnet mask, gateway, and DNS.
Connects the camera to a Wi-Fi network.
Configures Dynamic DNS for remote access.
Sets up email alerts for events like motion detection.
Configures motion detection and alarm triggers.
Instructions for updating camera firmware.
How to reset forgotten admin username and password.
Resolves issues with no video display or ActiveX errors.
Troubleshooting remote access problems for the IP camera.
To Next Page
