Foscam FI8906W - Remote Login Display Errors

57
w
w
w
w
ww.foscam.
ww.foscam.
com
com
Shenzhen
Shenzhen
Foscam
Foscam
Intelligent
Intelligent
Technology
Technology
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
5168
5168
57
4.1.12 Only see black screen or undefined characters when using remote
login
If you could access the login page remotely, this indicates that your DDNS settings are correct. If
you are unable to see live video but only some undefined characters, this may be due to the
internet speed issues or the camera using Wi-Fi.
.
4.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: 255.255.255.0
Gateway: obtain dynamically
DHCP: Disabled
DDNS: Embedded FOSCAM domain name
Username and password
Default administrator username: admin
Default administrator password: No password
4.3 Specifications
ITEMS FI8906W
Image Sensor Image Sensor Color CMOS Sensor
Display Resolution 640 x 480 Pixels(300k Pixels)
Lens f: 4mm
Mini. Illumination 0.5Lux
Lens Lens Type Glass Lens
View Angle 50°
IR_CUT Filter will switch automatically
Video Image Compression MJPEG
Image Frame Rate 15fps(VGA),30fps(QVGA)
Resolution 640 x 480(VGA), 320 x 240(QVGA)
Light Frequency 50Hz, 60Hz or Outdoor
Video Parameters Brightness, Contrast